All DZR speakers & DXS XLF subwoofers are equipped with DSP.
Yamaha's DZR & DXS XLF series focus on high-quality processing, optimized low-frequencies and, above all, wide adjustment options and control over DSP. The Yamaha DXS XLF subwoofers are equipped with 96 kHz high-performance DSP processors and use dynamic EQ.
Already known from the Yamaha DXS series, which delivers extremely deep and powerful bass with its subwoofers, Yamaha proves once again that the bass low frequencies sound even more powerful.
Extended low frequencies & more BOOST
Since the additional name XLF stands for Extended Low Frequency, the XTENDED LF mode with a low frequency extension should not be missing. The XTENDED LF mode lowers the lower frequencies for the explosive bass.
So with the Yamaha DXS18XLF, the bass even goes down to 30 Hz.
This time Yamaha adds another feature and enables operation in NORMAL mode as well as in BOOST mode:
While the NORMAL mode provides an ideally balanced low frequency response, the BOOST mode delivers tighter and more focused bass with more punch.
Another special feature is the cardioid mode:
The cardioid mode, which was introduced in the Yamaha DXS12mkII and DXS15mkII models, is also adopted in the DXS XLF series.
With a subwoofer it is common for the low frequencies to be omnidirectional in all directions, so that the pressure can be felt around the subwoofer.
Cardioid mode, on the other hand, stands out from the functions of a standard subwoofer. This can be activated on the back of the DXS XLF subwoofer and enables a connection between two or more DXS XLF subwoofers to radiate the powerful and powerful "tremor" in the direction of the audience.
Features:
Subwoofer with bass reflex
Frequency range: 30Hz - 150kHz
Woofer: 18" Cone, 4" Voice Coil, Ferrite Magnet
96kHz and FIR Filter
96kHz AD/DA
136dB SPL
Analog IN: Combo x2, Line level (maximum +24dBu), Input impedance 20kΩ, Analog OUT: XLR3-32 x2, CH1/2: THRU or DSP OUT
USB2.0 Host 5V 500mA for USB memory DATA storage/load
IEC AC inlet x1 (V-Lock)
Class D
Fan cooled
40W (idle), 180W (1/8)
Aluminium die-cast, Side x2
Dimensions (W x H x D): 550 mm (21.7") x 657 mm (25.9") (with gümmi feet) x 720 mm (28.3")
Weight: 48.9kg (107.8lbs)
USB2.0 Host 5V 500mA for USB memory DATA storage/load