SPL Phonitor se + DAC768xs

The SPL Phonitor se + DAC768xs is the most affordable model of the proven Phonitor headphone amplifier. It uses the same amplifier circuitry, a Phonitor matrix and can also be equipped with a DAC card with PCM, S/PDIF and ADAT inputs.

High-performance electronics

SPL's proprietary VOLTAiR technology uses special discrete operational amplifiers that can tolerate an operating voltage of 120V. This is approximately twice the voltage that can be expected from standard opamps. Due to the high operating voltage, signal-to-noise ratio and total distortion can be improved by about 4.5 times (13dB) and are on par with the values measured on an industrial quality signal generator.

Powerful output level

The Phonitor se's power amplifier delivers up to 5W of output power on each channel at the headphone output. This allows you to drive not only very high-impedance Kopfhörer (>600Ohm), but also the extremely sophisticated models with magnetostatic or electrostatic transducers. This not only allows you to experience your music at any volume on any headphone model, but also allows you to turn down the volume control and achieve even lower noise levels

Natural listening with headphones

Like the other models in the Phonitor range, the Phonitor se features the Phonitor Matrix. This purely analogue circuit simulates the surround sound of a pair of speakers set up in a perfect stereo triangle. Depending on the setting, corresponding portions of the opposite channel are frequency-corrected and mixed into the left and right channels, thus faithfully simulating the natural crosstalk between the left and right ears when listening in a real room. You have to hear it, the effect is truly amazing! With the Phonitor se, this matrix is available to you in the form of 2 presets.

Ready for digital media

The Phonitor se is equipped with the DAC768xs digital-to-analog converter, which is expanded to include the common digital formats S/PDIF and ADAT, and also allows the connection of PC, Mac and Apple devices via USB. The converter card has been redesigned especially for the Phonitor se and resolves PCM audio up to 768kHz at 32bit dynamic depth. Direc Stream Digital is also recognized and supported with a resolution of DSD4 respectively DSD256. This means that even the finest sound details are reproduced accurately - more accurately than in many a mastering studio!