JBL VRx - 10 System

The JBL VRx - 10 System Active PA System is a complete active PA system, featuring 6500 watt output , and includes 4x VRX932 LAP Line Array Modules , 4x VRX918 SP Subwoofers and 2x Distance Rods. JBL's VerTec Series Line Arrays lead the industry in large venue sound reinforcement. While intended for smaller venues than VerTec, the VRX900 Series Constant Curvature Line Arrays are designed and built to the same high standards and uses the same advanced, concert-proven drivers. JBL's VRX900 Series speakers deliver extraordinary power handling, clarity, flexibility and, of course, stunning JBL sound in an attractive, easy to handle and affordable package.

The VRX918SP is a powered, suspendable subwoofer system containing a 2268FF neodymium magnet, patented Differential Drive, 18" woofer in a front-loaded, vented enclosure. The VRX918SP was designed specifically for use in arrays with the VRX932LAP Line Array speaker and VRX-AF Array Frame. In addition it may also be used in arrays consisting entirely of VRX918SP subwoofers.

The main features of the JBL VRX918SP include:

• Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1500 Watts of peak Power. DSP based resident input module provides system optimization, EQ and crossover functionality.
• 18 inch, 2268FF dual voice coil, neodymium magnet Differential Drive woofer for high-power capacity and light weight.
• Integral rigging hardware for simple connection of enclosures and optional array frame.
• 20 mm threaded pole socket for solid, secure satellite speaker mounting.
• Large port area for reduced distortion.
• Power Rating: 1500 Watts Peak; LF: Dual-Bridged Technology, Class D
• Frequency Range: 31 Hz – 220 Hz
• Dimensions (H x W x D): 508 mm x 597 mm x 749 mm (20.0 in x 23.5 in x 29.5 in)
• Frequency Response: 34 Hz – 220 Hz
• Maximum Peak Output: 126 dB SPL at 1m
• Bandpass Nominal Impedance: LF: 2 x 2 ohms
• LF Driver: 1 x JBL 2268FF 457 mm (18 in) dual voice coil; Differential Drive woofer with neodymium-magnet
• Audio Input Connector: XLR with loop through
• User Controls: Input Attenuator (0-16 dB); Selectable 80 Hz or 120 Hz Low Pass; 80 Hz High-Pass enable/disable for XLR loop thru.
• Signal Processing: DSP based, resident in Input Module
• System Management: DSP based limiters for mechanical and thermal protection
• AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60Hz
• AC Line Voltage: User selectable: 120V/240V (-15%, +10%)
• AC Input Connector: Neutrik PowerCon (NAC 3MPA)
• AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
• AC Current Requirements: 6A per system at 120V, 3A per system at 240V
• Enclosure: 18 mm birch plywood.
• Suspension / Mounting: Optional VRX-AF line-array frame kit or 10 mm forged eyebolts
• Finish: Black DuraFlex finish
• Grille: Powder coated, black, 16-gauge perforated steel with acoustically transparent foam
• Net Weight: 38.5 kg (85 lb)
• Optional Accessories: VRX-AF array frame; SRX718S-CVR: Pull-over padded cover (works with WK-4S); SS4-BK adjustable satellite speaker pole WK-4S Caster kit

The VRX932LAP is a powered, lightweight, compact 12" two-way line-array speaker system designed for use in arrays of up to five units. VRX932LAP is the ideal choice when line-array performance is needed but the venue size doesn't call for the very long-throw characteristics of larger line-arrays and a fast and easy setup is vital.

The main features of the JBL VRX932LAP include:

• Built-in JBL Drivepack DPC-2 amplifier module designed by Crown provides 1750 Watts of peak Power. DSP based resident input module provides system optimization and EQ functionality.
• JBL's exclusive neodymium magned Differential Drive woofer for high-power capacity and light-weight.
• VRX932LAP features 3 x 2408J Annular Ring Diaphragm HF drivers. The 2408 represents the latest in JBL Professional compression driver design.
• Constant Curvature waveguide for unprecedented array coherence.
• Integral rigging hardware for simple connection of enclosures and optional array frame. Dual angle pole socket for aiming flexibility.
• Array Configuration Selector permits "array shading".
• Power Rating: 1750 Watts Peak; 875 Watts Continuous
• Frequency Range: 57 Hz - 20 kHz (-10 dB)
• Dimensions (H x W x D): 349 mm x 597 mm x 444 mm (13.75 in x 23.5 in x 17.5 in)
• Frequency Response: 75 Hz - 20 Hz (+/-3db)
• Maximum Peak Output: 136 dB SPL at 1m
• Coverage Pattern: 100 x 15 nominal
• DPC-2 Output as (Continuous IED shaped pink noise into rated load impedance): LF: 750 Watts, HF: 125 Watts
• DPC-2 Output Section: LF: Dual-Bridged Technology, Class D
• Audio Input Connector: XLR with loop through
• LF Driver: 1 x JBL 2262FF 305 mm (12 in) neodymium magnet
• HF Driver: 3 x JBL 2408J, 38 mm (1.5 in)
• User Controls: Input Attenuator (0-16 dB)
• Signal Processings: DSP based, resident in Input Module
• AC Power Operating Range: 90-132 VAC or 216-264 VAC, 50/60 Hz
• AC Input Connector: Neutrik PowerCon (NAC 3MPA)
• AC Loop Through Connector: Neutrik PowerCon (NAC 3MPB)
• AC Current Requirements: L 6A per system at 120V, 3A per system at 240V
• Enclosure: 25/15 mm, 11-ply birch plywood
• Suspension / Mounting: Optional VRX-AF line array frame kit, 10mm forged eyebolts or internal dual angle 36mm pole mount cup for pole or tripod mounting
• Finish: Black DuraFlex finish
• Grille: Powder coated, black, 16-gauge perforated steel with with acoustically transparent foam
• Net Weight: 24 kg (52 lb)
• Optional Accessories: VRX-AF: Suspension array frame