The Body Pack XL has the same functional principle as the Fischer Amps® Hardwired In Ear Body Pack plus an additional Mic-In to add-on a microphone signal to the stereo or mono mix received. The integrated low-noise microphone preamp has standard features such as 48V phantom power, PAD switch to reduce the input signal by 20 dB and a gain control from + 12 dB to + 60 dB. An additional feature for the microphone input is the parallel out which allows to loop the microphone signal. The Body Pack XL is powered with a 9V battery or an additional mains adaptor (not included). This Body Pack is a compact in ear solution not only for orchestra musicians who want to mix their own microphone signal to the incoming in ear signal, but it is also an excellent tool for engineers to monitor microphone signals.
Dimensions L x W x H (in mm): 125 x 136 x 32
Weight: approx. 430 g without battery
Input Jacks: 3 Neutrik XLR 3-pole, with interlock
Output Jack: 3.5mm / 1/8" mini jack stereo, 1 XLR Mic Link-Out
Frequency Response: 30 Hz - 20 KHz +/- 2dB
Min. Impedance of Headphones: 12 ohms per side
Input Impedance: 15kohms channel 1 and 2; 2 kOhms microphone input (with PAD switch = 15 kOhms)
Nom. Input Level symmetric: 0 dBV (channel 1 and 2)
Max. Input Level symmetric: +4dBV (channel 1 and 2)
Limiting of the Input Signal: from +5 dBV (channel 1 and 2)
Input Level Mic Input: +60 dB to +6 dB
Max Output Power into 20 ohms: 40 mW per channel
Max. Operating Current: 65 mA (with add-on phantom power 120-140 mA)
Power supply: 9V block alkaline battery or 8.4V rechargeable battery NiMH with min. 210 mAh
DC Input: Ext. input power DC 9V (pin +, ring -)
Operating Time of Battery: Alkaline battery approx. 7.5 hours, NiMH rechargeable battery (270 mAh) approx. 4 hours (depending on headphones volume)
Sennheiser XSW IEM EK (A) 476–500 MHz
Fischer Amps In-Ear Monitor Beltpack 2x XLR-Eingõnge
Fischer Amps In Ear Stick Hardwired In Ear Bodypack