1 powerful LED 80 W COB (chip-on-board) cool white (CW)
Rainbow effect with variable speed
Gobo wheel with static gobos, 1 gobo, 8 color gobos and open
Operable in 7 CH DMX mode
Cooling of the unit is done by fans
Controllable via stand-alone; master/slave function; music control via microphone; DMX; QuickDMX via USB (optional); W-DMX by Wireless Solution via USB (optional); CRMX by LumenRadio via USB (optional)
Already pre-programmed with Light'J
Flicker-free
Effect: Mirror roller effect; Stroboscope effect
OLED display
The Eurolite LED CAT-80 at a glance
The Eurolite LED CAT-80 LED beam effect can be used to create unique decorative lighting effects. The beam effect has a cool white 80 watt COB LED built in as well as a gobo wheel with static gobos, one gobo and eight color gobos respectively. Thereby, the rotating facetted mirror inside the device in interaction with a rotating, swiveling mirror roller create countless moving patterns in the room. The focus can be adjusted manually via the knob on the back. A dimmer and stroboscope effect as well as a rainbow effect also enable constantly varied lighting effects.
Control
The device is controlled via standalone operation with master/slave function or via DMX with 7 channels. Control to match the beat of the music is also easily possible thanks to the integrated microphone. In both automatic and music-controlled operation, integrated programs are played without further intervention. For wireless DMX operation, the model has a phantom USB port on the back to attach a corresponding receiver.
All settings and functions are made via the display with the control buttons on the back.
Flicker-free projection
Thanks to the flicker-free projection, the light effect can also be used for TV or television productions. The unit is cooled by a low-noise fan.
The device has a mounting bracket so that permanent installation on trusses or ceilings is possible.
Technical data
Power supply: 100-240 V AC, 50/60 Hz
Total connected load: 110 watts
Protection class: IP20
Protection class: SK I
Power connection: Power supply via P-Con (blue), built-in version Power connection cable with safety plug
Fuse: 5 x 20 mm, T 2 A fuse replaceable
Lamp type: LED lamp
LED: 1 x 80 W COB (chip-on-board) cool white (CW)
Flash rate: 0 - 25 Hz
Equipment: Gobo wheel with static gobos; focus manual
Gobos: gobo wheel with static gobos, 1 gobo, 8 color gobos and open
DMX channels: 7
DMX input: 3-pin XLR (M) built-in version
DMX output: 3-pin XLR (W) built-in version
Cooling: fan
Control: stand-alone; master/slave function; music control via microphone; DMX; QuickDMX via USB (optional); W-DMX by Wireless Solution via USB (optional); CRMX by LumenRadio via USB (optional); Light'J