Founded back in 1927 in Indiana, Electrovoice has been manufacturing speakers since the 1950s and is still an established name in the industry today. The name stands for robust quality products that are used professionally all over the world. The SX 300 E follows this tradition and convinces with its modern design, contemporary features and superior performance.
The Electro Voice SX 300 E is robustly built and, thanks to its compact polypropylene housing, a lightweight of only 14.5 kg. With a pulse output of up to 1200 watts and a continuous output of 300 watts, the SX 300 E has enough reserves for impressive performances. In order to fully exploit this power, the power amplifier should be able to deliver 2 to 4 times the power, i.e. 600 to 1200 watts. Approximately the same tonal results can be achieved with 300 to 450 watts. If particularly high sound pressure levels are not required, 150 to 200 watts of power amplifier output will suffice. The SX 300 E can generate a maximum sound pressure of 131 dB.
The speakers used are a 12" woofer and a 1.25" tweeter with titanium diaphragm. The tweeter is coupled to the room by a constant-directivity horn with a dispersion angle of 65° vertically and horizontally. This ensures a homogeneous dispersion of high frequencies, both horizontally and vertically. The housing is made of a specially developed polypropylene foam. This foam has similar acoustic properties to wood at a lower weight and can be easily shaped into any desired form. Therefore the symmetrically radiating horn could be realised as part of the cabinet.
The recessed handle makes it easy to transport and mount on speaker stands. The 60° bevel on both sides is not only designed for use as a stage monitor, but also allows the installation in various speaker array combinations by means of optionally available mounting brackets. The rear connector panel offers two Neutrik NL4 Speakon connectors connected in parallel for looping the power amp signal through to another Electro Voice SX 300 E
Whether as a club system with subwoofer support, standalone for small to medium-sized rooms, as a stage monitor, or in different array arrangements, the SX 300 E is suitable for a wide variety of PA tasks. With a superb peak power handling of 1200 Watts, dynamic response and precise output is guaranteed. Thanks to its low weight, the compact full-range loudspeaker can be easily handled by one person. This makes the Electro Voice SX 300 E a robust and powerful speaker with excellent sound characteristics for various applications.
Звук хороший, но с хорошим усилителем! Первый раз подключил активный пульт, и мне не понравилась средняя частота,она была провалена, потом подключил другой усилитель и колонки зазвучали ровно и хорошо. Хорошая частотная характеристика и хорошее соотношение между верхним и нижним динамиками, прозрачные высокие частоты, приятная уху середина в которую превосходно вписывается голос, бас не выпирает, но хочется его насыщеннее и пониже, если не хватает то нужен сабвуфер. Акустика особых настроек звука не требует и замечательно звучит в линию! Качество сборки прочное, пластик крепкий. Цена меня устроила, но с акустикой класса выше не сравнивал. Товар заказывал в Россию, посылка прибыла за 18 дней, хорошо упакована, без дефектов при транспортировки. Заказом очень доволен, спасибо MUSIC STORE за хорошую слаженную работу!
A SX300 is a classic in the World of PA.
Crystal clear sound that really reach out and insures a high quality of materiale reproduction.
This is my sixth set i own, and the other five sets is still going strong!