DAS Audio VANTEC-12A 750W, 12", 2-Wege

THE VANTEC-12A is equipped with a 1500W/peak Class-D bi-amp amplifier, FIR filter and high-quality DAS Audio components with 12"/1" equipment, it is aimed equally at demanding musicians and DJs as well as professional users.

Equipped with eniem 12F4 bass-midrange driver with a 3" voice coil and a M-28 1" tweeter with titanium cone, which acts on a 90°x50° horn, the speaker achieves up to 135dB max. SPL.

The high quality birch multiplex enclosure with ISOflex™ polyurethane coating, including 12 x M10 mounting point, has a beveled back including enclosure protection, allowing it to be used as a floor monitor. Two tripod mounts with 0° and -10° are available.

In addition to the already comfortable operation via DAScontrol™ with LCD display and encoder, the VANTEC-12A can also be operated via the DASlink™ app and allows HD audio streaming via Bluetooth even in stereo. 5 different voicing presets, 3-band user EQ, high-pass filter and propagation delay (up to 10m) round out the extensive features. Depending on the device, up to 12 speakers of the ALTEA-700 and VANTEC series can be controlled simultaneously and managed in groups via the DASlink™ Group Manager.

Two separately controllable mic/line inputs with combo jack and a 3.5mm jack input offer versatile connection options.

Thanks to an activatable standby mode, the VANTEC-12A can also be installed in hard-to-reach places. The front illuminated logo can be switched off or activated as a limit indicator

Features:

Frequency range (-10 dB): 60 Hz - 20 kHzHorizontal
detection range (-6 dB): 90ºVertical
coverage angle: 50ºMaximum
peak sound pressure level at 1 m: 135 dNominal
amplifier
power (
RMS): 750 WNominal
amplifier power (peak): 1500
WEInput type: BalancedInput impedance












: 20 kOhmInput sensitivity
: 3 V (+12 dBu)
Audio signal input connector: 2 x XLR femaleAUX input

:


1 x 3.5 mm mini jackAudio
signal loop thru connector: 1 x Male XLRSteel control



:




DASlink™, DAScontrol™Power consumption




:





230 V / 115 V 1.2 A/2.4
AGHousing construction: birch plywoodHousing geometry






:







trapezoidalSuspension






























: M10 suspension pointsSurface
: ISO-flex™ paintColor
: BlackDimensions
: ( H x W x D ) 620 x 380 x 380 mmNet weight
: 21.5 kgComponents








































: LF driver 12F4, HF driver M-28, horn/conductor BC-95.