RCF CX12N351, coaxial transducer 12"/1,4", 450W/90W @ 8/8 Ohm

The CX12N351 is a top class coaxial design that provides an excellent frequency response linearity withvery low distortion. The CX12N351 is powered from an integrated high power neodymium magnetic structure that guarantee high dynamic and sensitivity for both components. The mid-bass section features a 3,5" inside- outside voice coil design that provides a very high power handling, especially in comparison to a standard 3" voice coil. Thanks to an integrated demodulation ring the mid-bass section gets a fastest time response and lower distortion. The compression driver use a 2.5" diaphragm with a 1.4" throat featuring several state of the art technologies. The diaphragm and suspension are formed from 0.05 mm thick pure titanium.

Features 3.5-inch , fibreglass outside aluminum voice coil 900 Watt continuous program power handling 98.5 dB Sensitivity 50 Hz - 3.0 kHz Frequency range Dual-forced air ventilation for minimum power compression M-roll surround and exponential cone geometry Demodulation ring 2.5-inch Diaphragm, 1.4-inch Exit Throat/pure titanium compression driver 180 Watt Continuous program power handling Frequency range: 700Hz – 20kHz Direct Drive Voice Coil Assembly 3-slot, optimised geometry phase plug Aluminum rear cover Copper inductance ring for extended response

CX12N351 Driver Nominal Diameter: 35.5 / 1.4 mm/inch Rated Impedance: 8 Ohm Program Power: 180 W Power Handling Capacity: 90 W Sensitivity 1 W, 1 m: 110 dB Frequency Range: 700 - 20000 Hz Minimun Impedance: 7.9 Ohm Voice Coil Diameter: 63.7 / 2.5 mm/inch Voice Coil Material: Edgewound Aluminum Number of layers: 1 - Outside Diaphragm Material: Pure Titanium Diaphragm Design: Dome Suspension Material: Pure Titanium Suspension design: Progressive BL factor: 10.4 T · m Flux density: 2.0 T Phase plug design: 3 slot Phase plug material: Aluminium Magentics: Neodymium Voice Coil Demodulatuon: Copper ring

CX12N351 Horn Throat Diameter: 36 / 1.4 Nominal coverage (-6dB): 60°° Cut-off Frequency: 900 Material: Structural Polyurethane

CX12N351 Woofer Nominal Diameter: 300 / 12 mm/inch Rated Impedance: 8 Ohm Program Power: 900 W Power Handling Capacity: 450 W Sensitivity: 98.5 dB Frequency Range: 50 - 3000 Hz Effective Piston Diameter: 260 / 10 mm/inch Max Excursion Before Damage (peak to peak): 39 / 1.5 mm/inch Minimun Impedance: 6.8 Ohm Voice Coil Diameter: 87 / 3.4 mm/inch Voice Coil Material: Copper Voice Coil Winding Depth: 16.5 / 0.65 mm/inch Number of layers: 2 Kind of layer: inside / outside Top Plate Thickness: 11 / 0.43 mm/inch Cone Material: No pressed pulp Cone Design: Curved Surround Material: Polycotton Surround Design: M - roll

Thiele/Small Parameters Resonance frequency: Fs - 58 Hz DC resistance: Re - 5.8 Ohm Mechanical Factor: Qms - 5.4 Electircal Factor: Qes - 0.21 Total Factor: Qts - 0.20 BL Factor: Bl - 25 T · m Effective Moving Mass: Mms - 62 g Equivalent Cas air load: Vas - 47 liters Effective piston area: Sd - 0.053 m² Max. linear excursion ( mathematical): Xmax - 5.5 mm Voice - coil inductance @ 1 kHz: Le1K - 1.5 mH Half-space efficiency: Eff - 4.4%

Mounting Information Overall Diameter: 320 / 12.6 mm/inch Bolt Circle Diameter: 293 - 304 / 11.5 - 12 mm/inch Bolt Hole Diameter: 6.5 / 0.3 mm/inch Front Mount Baffle Cut-out: 284 / 11.2 mm/inch Rear Mount Baffle Cut-out: 284 / 11.2 mm/inch Depth: 144 / 5.66 mm/inch Volume occupied by the driver: 2.2 / 0.77 liters/ft³ Net Weight: 5.9 / 13 kg/lbs